DAS PA-500 2-channel amplifier, 250 W @ 4 ohm, 2U, 230 V
The PA series amplifiers are designed and built to provide an affordable quality powering solution. The wide range of models makes the series ideal for both installed or mobile sound reinforcement applications. The amplifiers incorporate a rugged 2 unit all-steel chassis ensuring structural rigidity. The low-noise fans offer both quiet and cool operation. The amplifier incorporates rear located switches which permit operational mode selection (bridge stereo or parallel) and input sensitivity selection.
- 250 W x 250 W at 4 "
- Stereo/Bridged/Parallel Operation
- SpeakON output connectors
- Clip protection and Signal present LED indicators
Audio Signal Loop Thru Connector | 2 x Male XLR | Audio Signal Input Connector | 2 x Female XLR |
---|---|---|---|
AC Power Requirements | 230 VAC 50/60 Hz | Dimensions H x W x D (mm) | 88 x 482 x 227 mm |
Net Weight kg | 10.1 | Stereo Mode (both channels driven) | Power 8 Ohms - 150 W, Power 4 Ohms - 250 W |
Bridged Mono Mode | Power 8 Ohms - 500 W | Frequency Response | 20 Hz - 20 kHz +0 - 1 dB |
Signal to Noise Ratio | > 100 dB @ 20 Hz - 20 kZ | Total Harmonic Distortion | <0.5% 20 Hz - 20 kHz |
Damping Factor | > 200 @ 10 Hz - 400 Hz | Voltage gain | 27 dB |
Audio Input Connector (2) | 2 x Female XLR | Speaker Output Connector | 2 x speakON |
Audio Output Connector (2) | 2 x Male XLR | LED Indicators | Power Protection Signal Clip |
Amplifier Protections | Protection against short circuits no-load on/off muting RF interference. | Cooling | Internal heat sinks with forced air: Fan cooled |
Current Draw 230 V | 2.8 A |