GBP (£)
The dbx® 12 Series were designed to meet the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. The 1215 provides standard features like dual channels, 15 2/3 octave bands, ISO frequency centers, +/-12 dB input gain range, and switchable 40Hz/18 dB per octave low-cut filters, but also includes other thoughtful features. These include 45 mm faders; selectable +/-6dB or +/-15dB boost/cut range for precise gain adjustments; XLR, barrier strip, and 1/4'' TRS connectors for installation ease; balanced inputs and outputs for quiet operation; and chassis/signal ground lift capabilities for quick hum isolation. The visionary design of the dbx 12 Series makes your job easier.
The dbx 12 Series Equalizers were precision engineered to provide years of maintenance-free operation in any application. The magnetically isolated transformer, electronically balanced/unbalanced inputs and servo balanced/unbalanced outputs, RF-filtered inputs and outputs, and power-off hard-wire relay bypass with 2 second power up delay were steps our engineers took to ensure compatibility for all installations. Only the best components were utilized, yielding a 10Hz to 50kHz frequency response, greater than 90dB SNR (ref +4dBu), less than 0.005% THD +Noise (1kHz at +4dBu), and interchannel crosstalk of less than -80dB from 20Hz to 20kHz. All this attention to detail is contained in a 2U steel/aluminum chassis.
- 18dB/octave 40Hz Bessel low-cut filter
- Chassis/signal ground lift capability
- Internal power supply transformer
- Power-off hardwire relay bypass with 2-second power-up delay
- Switchable boost/cut ranges of ±6 or ±15 dB
- Electronically balanced/unbalanced inputs
- Servo balanced/unbalanced inputs
- RF filtered inputs and outputs
- XLR, Barrier Strip, and 1/4" TRS connectors
- -12dB/+12dB input gain range
| Input Impedance | Balanced 40 kOhm, unbalanced 20 kOhm | Power Connector | IEC receptacle |
|---|---|---|---|
| Range Switch | (recessed) Selects either +/- 6dB or +/- 15dB slider boost/cut range | Low cut Switch | (recessed) Activates the 40Hz 18dB/octave Bessel high-pass filter |
| Bypass Switch | Bypasses the graphic equalizer section in the signal path | I/O Meter | 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu |
| Indicators | EQ Bypass (Red); Clip (Red); Low Cut (Red); +/-6dB (Yellow); +/-15dB (Red) | Shipping Weight | 9.5 lbs. (4.3 kg) |
| Interchannel Crosstalk | <-80db, 20Hz to 20kHz | THD+Noise | <0.005% |
| Max Output | >+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm) | Input Connectors | 1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip |
| Max Input | >+21dBu balanced or unbalanced | Dimensions | 3.5" H X 19" W X 7.9" D (8.9cm x 48.3cm x 20.1cm) |
| Output Type | Impedance-balanced/unbalanced, RF filtered | Input Type | Electronically balanced/unbalanced, RF filtered |
| Operating Voltage | 100VAC 50/60Hz; 120VAC 60Hz; 230VAC 50/60Hz | Output Connectors | 1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip |
| Unit weight | 8.5 lbs. (3.9 kg) | CMRR | >40dB, typically >55dB at 1kHz |
| Output Impedance | Balanced 200 ohm, unbalanced 100 ohm | Power Consumption | 24W |
| Bandwidth | 20Hz to 20kHz, +0.5/-1dB | Dynamic Range | 109dB; 115dB |
| Signal to Noise Ratio | 90dB, 97dB | Frequency Response | <10Hz to >50kHz, +0.5/-3dB; +/-15dB range; +/-6dB range |
