DPA d:facto™ 4018VL Linear Supercardioid Mic, Wired DPA Handle, Black
The d:facto™ series brings true studio sound to the live stage and broadcasting studio. These mics are available in an extremely linear version as well as in a version with a high-end boost. The modular nature of the d:facto™ series allows you to switch the capsule as well as the adapter, making it the most flexible vocal microphone available on the market.
CAPSULE
- Linear with high-end boost (4018V)
WIRED OR WIRELESS
- Wired
COLOR
- Black
ACCESSORIES
- Wired handle
- Clip
- Grid
d:factoTM 4018VL Linear Supercardioid Mic, Wired DPA Handle, Black
4018V-B-B01d:facto™ 4018V Softboost Supercardioid Mic, Wired DPA Handle, Black
- Extraordinarily natural sound
- Perfectly uniform supercardioid directionality
- High separation
- Extreme SPL handling
- Low handling noise
- Sleek design
- Flexible adapter system fits most professional wireless systems
Sensitivity, nominal, ±2 dB at 1 kHz | 5 mV/Pa; -46 dB re. 1 V/Pa | Relative humidity (RH) | Up to 90% |
---|---|---|---|
Maximum output voltage, RMS | 8 V | Microphone length | 205 mm (8.1 in) |
Capsule diameter | 19 mm (0.75 in) | Power supply (for full performance) | 48 V Phantom power (± 4 V) |
Common mode rejection ratio (CMRR) | > 50 dB at 1 kHz | Output balance principle | Impedance balancing with Active Drive |
Cable drive capability | 100 m (328 ft) | Minimum load impedance | 1 kΩ |
Max. SPL, peak before clipping | 160 dB | Total harmonic distortion (THD) | < 1% up to 139 dB SPL peak |
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL) | Typ. 75 dB(A) | Equivalent noise level, A-weighted | Typ. 19 dB(A) re. 20 µPa (max. 21 dB(A)) |
Weight | 309 g (10.9 oz) | Frequency range, ±2 dB, at 12 cm (4.7 in) | 100 Hz - 16 kHz |
Cartridge type | Pre-polarized condenser | Principle of operation | Pressure gradient |
Directional pattern | Supercardioid | Polarity | +V at pin 2 for positive sound pressure |
Temperature Range | -40°C to 45°C (-40°F to 113°F) | Microphone Diameter | 52 mm (2.05 in) |
Current Consumption | Max. 2 mA | Connector | XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase |
Frequency Range | 20 Hz - 20 kHz, permanent third order high pass filter at 80 Hz | Output Impedance | 100 Ω |
Dynamic Range | Typ. 120 dB | Color | Matte black |