GBP (£)
Code: DPA5006A
DPA d:mension™ Surround Kit with 5 x 4006A, Clips, Windscreens in Peli Case
€10,905.00
Available to Order
QtyAdd to Cart
The 5006A Surround Microphone Kit from DPA Microphones includes five 4006A omnidirectional microphones, matched within 0.5dB on both frequency response and sensitivity. They can be used for AB stereo, Decca Tree, or surround main array recording techniques for orchestral settings. DPA includes mic holders, grids, and windscreens for all mics. The included Peli foam-lined case can be used for transportation and storage.
- 5 carefully matched microphones
- Suitable for Decca Tree and rear omni surround array
- Especially useful for acoustically accurate reproductions
- Peli case for transportation and protection
| Signal-to-Noise Ratio | Typ. 79 dB(A) | Dimensions (Diam. x L) | 0.63 x 6.70" (16.00 x 170.00 mm) |
|---|---|---|---|
| Common Mode Rejection | > 60 dB | Attenuation / Gain | Switchable attenuator: 0 dB / -20 dB |
| EIN | Equivalent Noise Level, A-Weighted: Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A)); Equivalent Noise Level, ITU-R BS.468-4: Typ. 27 dB (max. 29 dB) | Cable drive capability | Up to 328' (100m) with DAD6001 XLR adapter |
| Minimum load impedance | 2k ohm | Polarity | +V at Pin 2 for positive sound pressure |
| Relative Humidity | Up to 90% | Temperature Range | -40 ° to 122 °F (-40 ° to 50 °C) |
| Max Input Sound Level (SPL) | 147 dB | Weight | 5.7 oz (163.0g) |
| Transducer | Pressure, Pre-Polarized Condenser | Polar pattern | Omnidirectional |
| Output | Connector: 3-pin XLR; Output Balance Principle: Impedance balancing with Active Drive | Sensitivity | Nominal ± 2 dB at 250Hz: 40 mV/Pa; -28 dB re. 1 V/Pa |
| Output Impedance | < 200 ohm | THD | < 1 % up to 139 dB SPL peak |
| Dynamic Range | Typ. 124 dB | Frequency Response | 10 Hz to 20 kHz |
| Color | Matte Black | Power supply | Power Supply: 48 V Phantom Power (+/- 4 V); Current Consumption: 2.8 mA; Output Voltage: > 4 V |
