GBP (£)
Code: DPAKIT-4060-OC-SMK
DPA d:screet™ CORE 4060 Stereo Microphone Kit
€1,120.00
Available to Order
QtyAdd to Cart
The high-sens, normal SPL, black d:screet Core 4060 Stereo Microphone Kit from DPA includes two 4060 omnidirectional lavalier microphones hardwired to MicroDot connectors, two XLR adapters with belt clips, two boundary layer mounts, two surface mounts, two soft-boost grids, two holders for strings, a single magnet mount, five foam windscreens, and a storage case. This kit is a cost-effective and flexible stereo recording solution aimed at project studios using discreet mic setups for live stage, theater, and rehearsal applications.
- Extremely rugged and reliable
- Exceptional audio quality
- Low noise and high sensitivity
- Large selection of accessories
- Modular adapter system fits most professional wireless systems
| Dynamic Range (Typical) | Core: 106 dB | Microphone length | 0.5" / 12.7 mm |
|---|---|---|---|
| Cable drive capability | Up to 984' / 300 m | Total harmonic distortion (THD) | Core: Typ. 129 dB |
| Cartridge type | Pre-polarized condenser | Principle of operation | Pressure |
| Directional pattern | Omnidirectional | Polarity | Positively increasing sound pressure produces positive going voltage on MicroDot pin |
| Relative Humidity | Up to 90% | Temperature Range | -40 to 113°F / -40 to 45°C |
| Microphone Diameter | 0.21" / 5.4 mm | Weight | 0.26 oz / 7.5 g, including cable and MicroDot connector |
| Equivalent Noise Level | A-Weighted: Typ. 23 dBA re. 20 µPa (max. 26 dBA) ; ITU-R BS.468-4: Typ. 35 dB (max. 38 dB) | Max SPL | Peak before Clipping: 134 dB |
| Cable Length | 5.9' / 1.8 m | Connector | MicroDot |
| Sensitivity | Nominal, ±3 dB at 1 kHz: 20 mV/Pa; -34 dB re. 1 V/Pa | Frequency Range | 20 Hz to 20 kHz (±2 dB); Soft-Boost Grid: 20 Hz to 20 kHz, 3 dB soft boost at 8 to 20 kHz; High-Boost Grid: 20 Hz to 20 kHz, 10 dB boost at 12 kHz |
| Output Impedance | 30 to 40 Ohms | Signal to Noise Ratio | A-Weighted, re. 1 kHz at 1 Pa (94 dB SPL); Typ. 71 dBA |
| Power supply | For Wireless Systems: Min. 5 V max. 50 V through DPA adapter; With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance |
