GBP (£)
Code: DPA4098-DC-G-B01-075
Enhance your audio recording setup with the DPA 4098 CORE Supercardioid Mic in black. XLR connection, 77 cm boom, top and bottom gooseneck for precision.
€750.00
Available to Order
QtyAdd to Cart
DPA 4098 CORE Supercardioid Mic, Black, XLR, 77 cm (30 in) Boom, top and bottom Gooseneck
Experience exceptional audio clarity with the DPA 4098 CORE Supercardioid Gooseneck Microphone. Designed for professional speech and presentation applications, this high-performance mic delivers outstanding sound quality with minimal distortion—even at extremely high SPLs (up to 135dB).
Key Features:
Available in black or white, with multiple boom lengths and XLR or MicroDot termination, the DPA 4098 CORE is the perfect choice for professional podium, lectern, and conferencing needs.
Key Features:
- Crystal-Clear Audio: Ensures intelligibility even in loud speaking environments
- Highly Directional: Supercardioid pattern for superior isolation and focus
- RF Interference Rejection: Minimizes unwanted noise for clean sound
- Wireless Capability: Compatible with podium setups for versatile use
- Sleek Scandinavian Design: Elegant and discreet for seamless integration
Available in black or white, with multiple boom lengths and XLR or MicroDot termination, the DPA 4098 CORE is the perfect choice for professional podium, lectern, and conferencing needs.
- Directional pattern: Supercardioid
- Principle of operation: Pressure gradient
- Cartridge type: Pre-polarized condenser
- Frequency response: 20 Hz - 20 kHz
- Effective frequency range ±2 dB, at 20 cm (7.9 in): XLR-3M: 100 Hz - 15 kHz with 3 dB soft boost at 8-15 kHz and permanent 2nd order low-cut filter at 80 Hz
- Sensitivity, nominal, ±3 dB at 1 kHz: 16 mV/Pa; -36 dB re. 1 V/Pa
- Equivalent noise level, A-weighted: Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
- Equivalent noise level, ITU-R BS.468-4: Typ. 35 dB (max. 38 dB)
- Distortion, THD < 1%: 130 dB SPL RMS, 133 dB SPL peak
- Dynamic range: Typ. 110 dB
- Max. SPL, THD 10%: 135 dB SPL peak
- Rated output impedance: From MicroDot: 30 - 40 Ω. From XLR connector or DAD6001-BC XLR Adapter: 100 Ω
- Minimum load impedance: 2
- Cable drive capability: MicroDot: Up to 300 m (984 ft) with DAD6001-BC XLR Adapter: XLR-3M: Up to 100 m (328 ft)
- Output balance principle: Signal balanced with XLR connector or DAD6001-BC XLR Adapter
- Common mode rejection ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter
- Power supply (for full performance): MicroDot: Min. 5 V to max. 10 V through DPA adapter for wireless systems or P48 (Phantom Power) with DAD6001-BC XLR adapter, XLR-3M: P48 (Phantom Power)
- Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
- Connector: MicroDot or XLR-3M
- Weight: XLR-3M: 77 cm (30 in): 115 grams (4.1 oz)
- Microphone diameter: 5.7 mm (0.22 in)
- Microphone length: XLR-3M: 77 cm (30 in)
- Polarity: +V at MicroDot pin for positive sound pressure (and pin 2 on XLR connector or DAD6001-BC XLR adapter)
- Temperature range: -40°C to 45°C (-40°F to 113°F)
- Relative humidity (RH): Up to 90%
- Colors: Black, White
